Etchall Etching Crème is a reusable cream that produces a white opaque, permanent etched finish on glass, mirror, ceramic, porcelain, marble and slate.
When using Etchall with Ikonart Stencil Films, follow the directions on the bottle. Protect your work area. Clean surface to be etched. Apply stencil and rub down the edges to remove all air bubbles. Tape off the edges if needed. Apply a heavy coat of Etchall to open areas on stencil. Let the cream sit for 15 minutes. You can scrape off the excess cream and return to container for re-use, if desired. Flush etched surface with water to remove remaining cream before removing the stencil.
After you etch, you can add a product like Rub n Buff or colored wax paste to your etched design for color.
Storage: Store at 65-85F (18-30 C) in original container. Exposure to temperatures above 85F will cause cream discoloration, but will not affect cream usability or performance. Temperatures below 65F will produce crystals. If crystals are present, place closed container in warm water for several minutes, then stir until crystals dissolve.
- Permanent etch
- Made in the USA
- Ages 12 and up
- 4 oz.